I have performed an experiment never done before in science- I used a Tesla coil for its use in high voltage high frequency and apply its discharge plasma not upon the dielectric of free air- but to the dielectric of water itself- specifically I used ultrapure reagent grade water from manufacture NERL-this is to establish the high degree of insulation needed for plasma (you cannot have contaminants for conductivity)- I doped my water with heavy water from the manufacturer UNITED NUCLEAR-(however- a full concentration of heavy water is desired)- I built my 1 million volt Tesla coil entire tunable- every aspect of it- as it must be done to TUNE THE OUTPUT DISCHARGE OF THE TESLA COIL to the water itself- once the arc is stable- the voltage may be increased- I have written in my pdf file in my website of noblefuse.com that a prerequisite of 750 kv is needed as an electric field gradient about the charged particles used in fusion( in this case the hydrogen bound in the water molecule) because of voltage drops as expected as in all electrical systems upon the load (load here is the water)- a much higher voltage is needed in order to distribute the voltage gradient upon entire arc plasma length between electrodes in water- THUS- THE HIGH THE VOLTAGE- THE BETTER- within my website you will find a link to youtube showing my primitive experiment- BUT MAKE NO MISTAKE ABOUT THIS- THIS IS THE FIRST TIME EVER DONE BEFORE - I propose nuclear fusion of water/heavy water- my little experiment IS THE ROAD TO NUCLEAR FUSION- we must universally connect the dots- put two and two together- and conclude this- MY EXPERIMENT MUST BE REPEATED ON A LARGER SCALE- my system is a direct replacement of nuclear power plants particularly of the pressurized water reactor which uses heavy water already - a vessel already built for gamma radiation and other high energy flux which will emit with the plasma arc-
Power reactor in which the heat is dissipated from the core using highly pressurized water (about 160 bar) to achieve a high temperature and avoid boiling within the core. The cooling water transfers its heat to the secondary system in a steam generator. Example: Grohnde Nuclear Power Plant in Germany with an electrical output of 1,430 MW.
Replace the rod assemblies and use electrodes to conduct the Lightning bolt! High Voltage High frequency will create the magnetic pinch to slam the isotopes of hydrogen together which is bound in water- helium and oxygen are the outgassed products recaptured by expansion tanks-it is absolutely perfect!
_ I HAVE FOUND THE TRUE PURPOSE OF THE TESLA COIL- the answer was always in the lightning bolt- understanding of gamma bursts from lightning discharges have only been recently vindicated from satellite in late 90s---
CA 94305 United States
Said, R ( ) , STAR Lab, Electrical Engineering, 350 Serra Mall, Stanford, CA 94305 United States
Smith, D M ( ) , Physics Department and Santa Cruz Institute for Particle Physics, University of California, Santa Cruz, 1156 High Street, Santa Cruz, CA 95064 United States
Lopez, L I ( ) , Astronomy Department and Space Sciences Laboratory, University of California, Berkeley, CA 94720 United States
The observation of brief (
OpEdNews Member for 482 week(s) and 6 day(s)
1 Articles, 0 Quick Links, 4 Comments, 0 Diaries, 0 Polls