42 online
 
Most Popular Choices
Share on Facebook 15 Printer Friendly Page More Sharing
Exclusive to OpEd News:
Life Arts   

SAVE ENERGY - Make a change for the better

By       (Page 4 of 14 pages) Become a premium member to see this article and all articles as one long page.   No comments
Message YJ Draiman

Check thermostat settings to ensure the heating and cooling system turns on and off at the programmed temperatures.

Tighten all electrical connections and measure voltage and current on motors.

Faulty electrical connections can cause unsafe operation of your system and reduce the life of major components.

Lubricate all moving parts. Parts that lack lubrication cause friction in motors and increase the amount of electricity you use. It can also cause equipment to wear out more quickly, requiring more frequent repairs or replacements.

Check and inspect the condensate drain in your central air conditioner, furnace and/or heat pump (when in cooling mode). If plugged, the drain can cause water damage in the house, affect indoor humidity levels, and breed bacteria and mold.

Check system controls to ensure proper and safe operation. Check the starting cycle of the equipment to assure the system starts, operates, and shuts off properly.

Inspect, clean, or change air filter in your central air conditioner, furnace, and/or heat pump. Your contractor can show you how to do this yourself. Depending on your system, your filter may be found in the duct system versus the heating and cooling equipment itself. A dirty filter causes energy costs to be greater than they should be and can damage your equipment, leading to early failures.

System-Specific Maintenance

The following checklists outline additional steps your contractor should follow when servicing either your heating or cooling system:

Heating-Specific Checklist:

Check all gas (or oil) connections, gas pressure, burner combustion, and heat exchanger.

Improperly operating gas (or oil) connections are a fire hazard and can contribute to health problems. A dirty burner or cracked heat exchanger causes improper burner operation. Either can cause the equipment to operate less safely and efficiently.

Cooling-Specific Checklist:

Next Page  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  10  |  11  |  12  |  13  |  14

(Note: You can view every article as one long page if you sign up as an Advocate Member, or higher).

Rate It | View Ratings

YJ Draiman Social Media Pages: Facebook page url on login Profile not filled in       Twitter page url on login Profile not filled in       Linkedin page url on login Profile not filled in       Instagram page url on login Profile not filled in

Over 20 years experience. Specializing in: Energy Audit, Telecom audit, Utility bills audit and review for refunds or better rates, Demand Management, Energy Efficiency review and implementation, Renewable Energy, Lighting Retrofit, Solar Energy, (more...)
 
Go To Commenting
The views expressed herein are the sole responsibility of the author and do not necessarily reflect those of this website or its editors.
Writers Guidelines

 
Contact EditorContact Editor
Support OpEdNews

OpEdNews depends upon can't survive without your help.

If you value this article and the work of OpEdNews, please either Donate or Purchase a premium membership.

STAY IN THE KNOW
If you've enjoyed this, sign up for our daily or weekly newsletter to get lots of great progressive content.
Daily Weekly     OpEd News Newsletter
Name
Email
   (Opens new browser window)
 

Most Popular Articles by this Author:     (View All Most Popular Articles by this Author)

Little girl and her father were crossing a bridge.

Homeowner's Guide to Energy Audits

Unauthorized Charges on Your Local Phone - Utility Bill?

Our war for energy independence and economic sustainability

Life embodies friendship, compassion, happiness, sorrow, love and pleasure

Considering a Utility, Energy Audit: A Contractor's View

To View Comments or Join the Conversation:

Tell A Friend